rod for frog fishing
Well, before I got to obtain on the majority of these casts a bass would explode on the frog, and I hooked up with numerous bass that day. In each case the frog was just sitting stationary for a minimum of one minute before I started the retrieve, and I captured bass only while it was sitting still.
So my pointer is, let the frog sit for a while before retrieving. You never ever know what might amaze you! When fishing a frog with paddle feet, sew the center point of the feet to the frog body with a piece of monofilament. During a fight, this keeps the set of legs from getting tugged out of one side of the frog body or the other, which will destroy the bait.
I have changed the length of it to look more like the frog is floating with its legs outstretched. I have used this with all the best near weedbeds and my preferred way just hopping it off the bank into the water throughout the summer. A couple of us were on our method back home from a saltwater trip when we chose to make some casts into a little pond we had passed.
This abrupt impulse of a modification kept the fish coming, and the natural feel of the bait appeared to keep them from tossing the frog. A strategy that I utilize when fishing a hollow-body frog normally a Bronzeye frog, but I am sure that it works with others is what I call hopping.
The short jerks tend to make the frog airplane up on the water, offering it a hopping movement similar to a live frog. Usually the strike will occur on the time out. You will require to experiment to see for how long of a pause the fish desire, and in some cases it is not required to pause the lure at all.
To allow the frog to sit deeper in the water and trigger more of a commotion when coming through weeds and the water, peel back the rubber frog body and make a number of twists around the hook shank with a non-lead soldering wire. Create various buoyancy characteristics by including or subtracting covers of the soldering wire.
This allows you to use a fragrance that will slowly distribute into the water behind your bass-enticing frog! I also have included a jig rattle to the frog's hook shank to create even more commotion. I utilize the rubber jig type rattle holder. You can add either a single rattle or 2 rattles for even more sound.
Repeat a couple of times. This will draw in the attention of the bass, who at this moment is enjoying from the cover. Now, cast your frog into the cover. Stroll the frog in the cover and quickly enough the bass will attack. Hold your rod suggestion up high and count to two.
I like tossing frogs and rats. To assist zip them out there, I will shove one or 2 small worm weights up into the hollow body. They assist pitch the lure out there farther, and they act as a rattle as I down it back to the boat. Cast the frog onto the bank and pull it into the water about 6 inches off the bank.
In some cases a still bait is a simple meal for a bass. Have you ever seen a frog chased after off the bank by a snake? The frog will hit the water and swim in two or 3 frenzied spurts, almost clearing the water. If your routine method of fishing your frog seems to not be drawing interest, attempt casting to the waterline and reeling your frog in 2 or three quick spurts with a quick pause in between each.
A bass will blast the frog as if to disable it and will strike a 2nd time if you do not reel it away. Sometimes this frenzied frog discussion will draw strikes when others won't. Many times I'll get more bites by just casting the frog onto the coast if the coastline is open enough.
By dragging the frog in from dry land, this creates a more natural entry into the water. A suggestion for fishing plastic frogs using braided line: If you use a silicone dry fly spray or paste to the first 5 feet of the line, it will keep the line floating on the surface area, guaranteeing better hook sets and frog performance.
After the cast, provide the frog a medium powered jerk and the frog will hop out of the water. Fly tiers have actually utilized this technique on their poppers for ages, yet you never ever hear or see anything about it. Functions like a charm, every time. Usage 3/16-inch orthodontics elastics one-third of the way up each leg skirt, doubling the elastic to hold the skirt product securely together, like a collar on a spinnerbait or jig skirt.
This is more effective in open water fishing because the leg skirts are united, making for a less weedless discussion. The benefit of this modification is that it makes the frog walk better and look more natural! When you're fishing a frog or any topwater lure, you have to be extremely patient not just before a strike but after, too.
I can't count how many times enjoyment took control of when a big bass exploded on my frog, and I jerked it far from the bass before he could really take it. Here are a couple of tips I have learned over the years to increase your number of strikes and hookups with a frog.
There are 2 ways to do this. One method is to pull the skirt material out of the back of the frog. Place 8 brass rattles produced tube baits into the holes where you pulled the skirt out. Using a piece of 25-pound mono, Super Glue the line to the center of the skirt.
Pull the line and skirt out to length and cut the line. The next method is the most basic. Cut a small hole in the leading back of the frog. Place rattles through the cut hole and usage silicone to plug the hole. Cut the skirt off 1 inch long on each side.
I utilize a heat gun or blow clothes dryer to make the bait concave on top, despite the fact that the bait is hollow. Start 1/4-inch in front of the hook point and go 1 inch forward. Just concave about 1/4-inch deep. The bait will be simply as weedless, and your hookup ratio will increase.
They add weight to make the bait sit lower in the mat and likewise sound to bring in fish. Toss your frog into the mat, move it a couple of inches and shake it in one place. Then move it a few inches and repeat. You have to give the fish time to discover the bait in thick mats.
Try to cast it in near hang over the end of a tree branch. Reel it in till it's hanging vertically off the branch. (In some cases it gets slammed early.) Just bob it up and down with the legs hanging in the water. When the bass grabs it and the line snaps off the end of the branch, there suffices slack so you will not set the hook too early.
On some frogs, the skirt that comprises the legs runs in one side of the frog and out the other. If you pull on one leg and make it a little bit longer than the other, the bait will have some walk-the-dog action by itself. The most apparent tip is my favorite: Match the hatch.
We use the tiniest frog we can locate, toss it up on the bank or shoreline, and "pop" it into the water. Let it sit for no greater than two seconds, and pop it away from the dirt. This remains in open water and right up against standing tules, sunken brush and fallen trees.
Sometimes, I could not count the variety of large bass that I captured out of these little places. As I walked the bank, I was always scaring up frogs, generally leopard frogs. Today, there are lots of types and producers of frogs, however back in the day, there were really couple of.
Those little children were excellent right out of the box, however required more action for the angler to not need to present the effort. While taking a break one evening, I was taking a look at my frog and wondering what could be done. I started to take apart the frog and I saw the skirt just slipped over the hook.
When I put the skirt back on, I understood that I had actually put it on backwards. When the rod was jerked to make the frog move, the skirt would correct, much like the legs of a live frog, and when the frog was resting, the skirt flared out simply like a frog does when it is resting on the water.
Try this little trick for affordable baits to get more action out of them. The method can be utilized on rats in addition to spinnerbaits that have a "one-way skirt," like the H&H Spinner. This little suggestion will definitely help you put more bass in the boat. Casting the frog directly onto the bank (on dry ground) is a great method to get bass to bite.
Cast the frog high and let it strike the moss with a loud plop. Just let it sit there. With the rod pointer held high, do not move the frog however just plop it several times, moving the moss. Hop it once and hang on. I have actually been fishing on Lake Texoma for rather some time and my mom of all people acquired some weedless frogs out of an Outdoor Life publication that at the time were the big buzz for catching bass.
When we started casting we expected to capture fish near to the shoreline, but as we gradually obtained and stopped briefly the frog we did not get any hits till the lure was reasonably near to the boat. I was still a beginner it took me numerous missed fish before I kept in mind fishing on a pond in Rhode Island where my daddy told me to count to 10 prior to setting the hook.
For a completely silent however lethal lure presentation, cast your frog onto the coast and pull it into the water. I find this to work more times than not. It doesn't matter if there is cover or simply open water if you find a spot that is consistently under shade, triggering the water temperatures to remain a little lower than the remainder of the pond/lake.
We would cast our frogs out over the moss that stretched out over the edge of the pond roughly 20 or so feet. We would erupt as far as we could, then stroll the frog in to the edge of the moss. If we didn't get a bite on the way in, we would let the frog sit at the outer edge of the moss and then wiggle the suggestion of our poles to make the frog shake.
Speak about thrilling! While fishing one day I saw a big bass come out from under a log at the edge of some lily pads to take a look at the buzzbait I was pitching at the time. Over the next a number of days, I came down and fished that spot a minimum of when a day with different lures and techniques to try to bring this bass to strike.
how to rig topwater frog
1. How to fish a topwater frog in ponds
2. How to fish a topwater frog in lakes
3. How to fish a topwater frog in rivers
4. How to fish a topwater frog in streams
5. How to fish a topwater frog in the ocean
6. How to fish a topwater frog in the rain
7. How to fish a topwater frog at night
8. How to fish a topwater frog in the winter
9. How to fish a topwater frog in the summer
10. How to fish a topwater frog for beginners
1. A topwater frog is a type of lure that is designed to resemble a frog or other small amphibian.
2. The lure is usually made of soft plastic and has a concave belly and two protruding eyes.
3. The frog is designed to be fished on the surface of the water and is often used in weedless fishing applications.
4. The lure is typically rigged with a single hook that is concealed within the body of the frog.
5. When fishing with a topwater frog, the angler will often use a slow, steady retrieve with occasional pauses.
6. The pauses in the retrieve are designed to make the frog appear to be struggling on the surface of the water, which will often trigger a strike from a nearby fish.
7. The frog can also be fished with a fast, jerky retrieve, which will often cause the frog to hop across the surface of the water.
1. Fishing is a $48 billion industry in the United States
2. There are over 41 million anglers in the United States
3. The most popular fish to catch in the United States is the largemouth bass
4. Fishing is the fourth most popular outdoor activity in the United States
5. 77% of anglers in the United States are male
6. The average age of an angler in the United States is 46
7. The average number of days spent fishing per year is 17
8. The average number of fish caught per year is 11
9. The most popular type of fishing in the United States is freshwater fishing
10. The most popular type of fishing gear used in the United States is baitcasting
There are many factors to consider when choosing a topwater frog, including the type of water you'll be fishing in, the size and type of fish you're targeting, and personal preference.
In general, frogs come in two main varieties: soft plastic and hard plastic. Soft plastic frogs are typically more realistic and often considered the better choice for fishing in clear water or around fish that are easily spooked.
The size of the topwater frog you use depends on a few factors, such as the size of the fish you're targeting, the type of water you're fishing in, and the amount of cover in the water. In general, though, you want to use a frog that is about the same size as the fish you're targeting. If you're fishing in open water with no cover, you can get away with using a smaller frog.
There is no definitive answer to this question as it depends on a number of factors, such as the water conditions, the time of day, and the type of fish you are targeting. In general, however, lighter colors such as white or chartreuse tend to be more effective in clear water, while darker colors such as black or brown are better in stained or muddy water.
There are a few different ways that you can rig a topwater frog, and it really depends on what you are trying to achieve. If you want the frog to float, then you can use a small piece of Styrofoam or a cork to keep it afloat. If you want the frog to sink, then you can use a small weight or a sinker.
When fishing a topwater frog, the best way to fish it is to use a slow and steady retrieve. This will allow the frog to stay on top of the water and not sink. You want to keep the frog moving so that it looks like it is swimming and not just sitting in one spot. If the frog does sink, you can stop and let it float back to the top.
The most common mistake people make when fishing a topwater frog is not using the right tackle. A lot of people use the wrong line, hooks, and weights which makes it difficult to fish a topwater frog effectively. Another common mistake is not paying attention to the frog's body language. The frog's body language can tell you a lot about where the fish are and what they're doing. If you're not paying attention, you'll miss out on a lot of strikes.
Some tips for fishing a topwater frog in different types of water include:
-In ponds or lakes, look for areas with lily pads or other vegetation, as frogs will often sit on these to ambush prey. Cast your frog into these areas and let it sit motionless for a few seconds before giving it a slow, steady retrieve.
-In rivers or streams, look for areas with slower moving water and plenty of cover.
Assuming you are asking for tips on how to fish a topwater frog lure, here are some tips:
In general, topwater frogs work best in warm weather when the fish are actively feeding. They can be effective in cooler weather as well, but you may need to slow down your retrieve.
Frogs are typically fished around heavy cover, so be prepared to get snagged occasionally.
There are a few key things to keep in mind when fishing a topwater frog around different types of cover. The first is to make sure that you are using the right size and type of frog for the cover you are fishing. If you are fishing around heavy cover, you will want to use a heavier frog that can handle being bounced around. If you are fishing around lighter cover, you will want to use a lighter frog that can be easily moved through the water.
There are a few different types of topwater frogs that can be used when fishing for different types of fish. When fishing for largemouth bass, a topwater frog that imitates a frog or a mouse is a good choice. For smallmouth bass, a topwater frog that imitates a baitfish is a good choice. When fishing for pike, a topwater frog that imitates a small mammal or a fish is a good choice.